Conference

International Conference

126) J. Jeong, H. Choi, J. Choi, and S. S. Lee, "Polymer micro atomizer for cone jet mode electrospray of water," 33rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2020), Vancouver, Canada, January 18-22, 2020.

125) M. Lim, J. Song, S.S. Lee, and B.J. Lee, "Performance analysis model for a near-field thermophotovoltaic system with a backside reflector," 9th International Symposium on Radiative Transfer, Athens, Greece, June 3-7, 2019.

124) J. Song, M. Lim, S.S. Lee, and B.J. Lee, "Performance analysis of Schottky junction-based near-field thermophotovoltaic system," Nanoscale and Microscale Heat Transfer VI, Levi, Lapland, Finland, December 2-7, 2019.

123) D. J. Kim, S. S. Lee, "Highly conductive silver mesh transparent electrode and its application", 5th Asia-Korea Conference on Science and Technology 2017, Singapore, November, 2017.

122) M. Lim, J. Song, J.H. Kim, S.S. Lee, and B.J. Lee, "Optimized Near-Field Thermophotovoltaic Device," Fourtheenth International Conference on Flow Dynamics, Sendai, Japan, November 1-3, 2017.

121) J. Song, M. Lim, S.S. Lee, and B.J. Lee, "Near-Field Thermal Radiation between Hyperbolic Metamaterials," The Ninth JSME-KSME Thermal and Fluids Engineering Conference, Okinawa, Japan, October 27-30, 2017.

120) M. Lim, J. Song, S.S. Lee, and B.J. Lee, “Novel Integrated Platform for Measuring Near-Field Thermal Radiation between Hyperbolic Metamaterials,” 3rd International Workshop on Nano-Micro Thermal Radiation, KAIST, Daejeon, Korea, June 26-28, 2017.

119) M. Lim, J. Song, J.H. Kim, S.S. Lee, and B.J. Lee, “Optimal Design of Near-Field Thermophotovoltaic System with Hyperbolic Metamaterials and Multilayered Graphene,” 3rd International Workshop on Nano-Micro Thermal Radiation, KAIST, Daejeon, Korea, June 26-28, 2017.

118) M. Lim, J.H. Kim, S.S. Lee, and B.J. Lee, “Design of Near-Field Thermophotovoltaic System with Hyperbolic Metamaterials and Multilayered Graphene,” 1st Asian Conference on Thermal Sciences, Abstract No. ACTS-P00785, ICC Jeju, Jeju, Korea, March 26–30, 2017.

117) J. Song, M. Lim, S.S. Lee, and B.J. Lee, “Near-field Thermal Radiation between Hyperbolic Metamaterials,” ASME International Mechanical Engineering Congress and Exposition, Abstract No. IMECE2016-65989, Phoenix, AZ, USA, November 11–17, 2016.

116) J. Jin, J. S. Eom, and S. S. Lee*, “Optical specifications of pyramidal micro-mirror fabricated by bulk etching of silicon with Au and MgF2 coating for MOT,” 25th International Conference on Atomic Physics, Abstract No. Mon-101, Seoul, Korea, July, 2016.

115) M. Lim, S.S. Lee, and B.J. Lee, “Introduction of Multilayer Graphene for the Practical Application of Near-Field Thermophotovoltaic System with Enhanced Performance,” 8th International Symposium on Radiative Transfer (RAD-16), Paper No. RAD-16-NS2, Cappadocia, Turkey, June 6-10, 2016.

114) S. Jin, M. Lim, S.S. Lee, and B.J. Lee, “Designing Near-Field Thermophotovoltaic Device with a Hyperbolic Metamaterial as an Emitter,” 1st Pacific Rim Thermal Engineering Conference, Paper No. PRTEC-15046, Hawaii's Big Island, USA, March 13-17, 2016.

113) M. Lim, S. Jin, S.S. Lee, and B.J. Lee, “Effect of Graphene on the Near-Field Thermophotovoltaic Device,” First Thermal and Fluids Engineering Summer Conference, Abstract No. TFESC-12646, New York, USA, August 9-12, 2015.

112) M. Lim, S. S. Lee, and B. J. Lee*, “MEMS-based parallel plates with sub-micron gap for measuring near-field thermal radiation,” 2nd International Workshop on Nano-Micro Thermal Radiation: Energy, Manufacturing, Materials, and Sensing, Abstract No. A0066, Shanghai, China, June., 2014.

111) M. Lim, S. S. Lee, and B. J. Lee*, “Theoretical investigation of effect of graphene on the near-field thermal radiation between doped Si plates”, ASME 4th Micro/Nanoscale Heat and Mass Transfer International Conference, Abstract No. MNHMT2013-22033, Hong Kong, China, December, 2013.

110) J. H. Kim, H. K. Im, S. S. Lee*, and K. C. Lee, “Development of High Transmittance and Conductivity Silver-Ink Grid Electrodes and Numerical approach of High Figure of Merit on Metal Grid”, ASME 2010 International Mechanical Engineering Congress & Exposition, San Diego, CA, USA, November, 2013.

109) S. R. Kim, Il Kim, J. H. Lee, and S. S. Lee, “Novel sidewall interconnection using perpendicular circuit die with non-solder bumps for 3D chip stack”, The 62nd Electronic Components and Technology Conference, San Diego, USA, 2012.

108) S. R. Kim, J. H. Lee, and S. S. Lee, “An efficient edge traces technique for stack chip interconnection”, International Welding/Joining Conference, Korea, 2012.

107) J. H. Lee, C. D. Yoo, J. Y. Song, S. S. Lee, and S. R. Kim, “A study on the Edge traces technique for 3D stack chip”, IEEE International 3D System Integration Conference (3DIC), Osaka, Japan, 2012.

106) H. H. Park, D. H. Lee, Y. H. Song and S. S. Lee, “Generation of non-thermal atmospheric pressure plasma in microchannel reactor and induction of cell death by an electric field of plasma”, ASME IMECE, Denver, Colorado, USA, 11-17, November, 2011

105) M. Lim, S. S. Lee, Y. K. Seo and Y. K. Hwang, “Synthesis and analysis of nanoporous material using microchannel”, ASME IMECE, Denver, Colorado, USA, 11-17, November, 2011

104) S. E. Lee, J. H. Kim, S. S. Lee, K. C. Lee, K. W. Lee, DJ Lee and S. U. Hong, “Fabrication of the Superhydrophobic Surface Using SU-8 Photoresist With Black Silicon”, ASME IMECE, Denver, Colorado, USA, 11-17, November, 2011

103) Sun-Rak Kim, Ah- Young Park, Choong D. Yoo, Jae Hak Lee, Jun-Yeob song, Seung S. Lee, “An efficient edge traces technique for 3D interconnection of stack chip”, Florida, USA, 5.31-6.3, 2011.

102) P. Lee, and S.S. Lee, “Patternable Pyrolyzed Carbon Microspeaker,” Proceedings of 2010 IEEE MEMS, Hong Kong, Jan 2010

101) C. H. Lee, S. W. Lee, and S. S. Lee, “Nanoantenna Using Mechanical Resonance”, IEEE SENSORS 2010, Hawaii, USA , 1-4. November, 2010

100) H. H. Park, S. S. Lee, Y. H. Song, and D. H. Lee, “Generatio and characterization of nonthermal atmospheric pressure plasma in microchannel reactor”, JCK Joint Seminar on MEMS/NEMS, Sapporo, Japan, 30-31, August, 2010

99) D. H. Lee, Y.-H. Song, H.-H. Park, and S. S. Lee, “Hypertrophic Cell Treatment for Apoptosis Inducement by Remote Plasma”, IEEE 37th Conference on Plasma Science, Norfork, VA, USA, 20-24. June, 2010.

98) J. A. Lee, J. H. Kim, S. I. Park, S. S. Lee, and K. C. Lee, “Nanoelectromechanical resonators based on pyrolyzed carbon”, JCK Joint Seminar on MEMS/NEMS, Sapporo, Japan, 30-31, August, 2010

97) J. H. Kim, S. H. Lee, J. A. Lee, S. B. Shim, K. C. Lee, and S. S. Lee, “Development of π–shape Parametric Resonators Including Torsional Self Pumping Springs”, ASME 2010 International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, Canada, 12-18 November, 2010

96) Y. S. Lee, J. H. Kim, S. W. Lee and S. S. Lee, “Development of LIGA-Like Process with Positive Photoresist & SU-8”, ASME 2010 International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, Canada, 12-18 Novenber, 2010

95) C. Y. Jin, M. H. Han, and S. S. Lee, “Usefulness verification of biocompatible microneedle patch for transdermal drug delivery,” IEEE Sensors 2009 Conference, Christchurch, Newzealand, 25-28 October, 2009, pp. 1533-1537

94)P. Lee, S. H. Lee, S. W. Kwon, Y. T. Hong, and S.S. Lee, “Flash type MEMS-based Anolog-to-Digital Converter of field emission,” Proceedings of 2009 IEEE Transducers, Denver, Colorado, Jun 2009

93) D. H. Lee, Y.-H. Song, H.-H. Park, S. S. Lee, “Atmouspheric Pressure Glow Plasma Generation for The Cancer Cell Treatment”, E-MRS 2009 Spring Meeting, Freiberg, France, 8-12. June, 2009.

92) Y. Im, Y. Joshi, S. S. Lee, “Experimental investigation of pool boiling of a dielectric liquid on copper nanowire enhanced surfaces,” Proc. 7th ECI International Conference on Boiling Heat Transfer, Brazil, May 3-7, 2009

91) P. Lee, S. H. Lee, S. W. Kwon, Y. T. Hong, S. S. Lee, “Flash Type MEMS-based Analog-to-Digital Converter of Field Emission,” 15th Int. Conf. on Solid-State Sensors and Actuators (Transducer’09), Denver, USA, pp. 1198-1201, June, 2009

90) K. Lee, J. A. Lee, K-C. Lee, S. S. Lee, “Transfer Method of Carbon Nanotube Film for Embedded Transparent Electrode”, ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, Nov. 13-19, 2009 (In Accept)

89) C. H. Lee, S. S. Lee, “Capacitive Tilt Sensor Using Metallic Ball,” ASME 2009 International Mechanical Engineering Congress & Exposition, Lake Buena Vista, Florida, USA, Nov. 13-19, 2009(In Accept)

88) C. H. Lee, S. W. Lee, S. S. Lee, “Field emission from vertically aligned indium tin oxide tip array”, IVEC 2009, pp253-254, Rome, Italy, April 28-30, 2009

87) M. H. Han, H. H. Park, D. H. Hyun, S. S. Lee, C. H. Kim, and C. G. Kim, “Punched-on-Substrate Solid Microneedle Sheets of Biocompatable Polymer for Transdermal Drug Delivery,” The 35th Annual Meeting & Exposition of Controlled Released Society, New-York, USA, 3194, July 12-16, 2008

86) C. W. Cho, S. K. Yu, H. H. Park, M. H. Han, S. S. Lee, D. H. Hyun, and C. H. Kim, “Effects of Methods Applying of the Polymer Microneedle-Roller on the Permeation of L-Ascobic Aid in Rats,” The 35th Annual Meeting & Exposition of Controlled Released Society, New-York, USA, 3142, July 12-16, 2008

85) H. H. Park, M. H. Han, S. S. Lee, S. J. Kim, C. W. Cho, D. H. Hyun, C. H. Kim, and C. G. Kim, "Effects of Immunization to Ovalbumin Administrated by Biocompatable Microneedle Sheets," The 35th Annual Meeting & Exposition of Controlled Released Society, New-York, USA, 3130, July 12-16, 2008

84) J. S. Lee and S. S. Lee, “SU-8 removal method for an electroplated micro mechanical structure with a HAR SU-8 mold,” Asia-Pacific Conference on Transducers and Micro-Nano Technology (APCOT 2008), p.142, June 22-25, 2008

83) S. W. Lee, J. A. Lee, and S. S. Lee, "Vertically aligned carbon nanowires (CNWs): Top down approach using photolithography and pyrolysis,” Nanotech 2008, Boston, USA, June, 2008

82) H. J. Kwon, S. W. Lee, and S. S. Lee, “Braille Code Display Device with a PDMS Membrane and Thermopneumatic Actuator,” 21st IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS’08), Tocson, USA, pp. 527-530, Jan., 2008

81) H. H. Park, M. H. Han, S. S. Lee, S. J. Kim, J. W. Cho, D. H. Hyun, C. H. Kim, and C. G. Kim, “Effect of Immunization to Ovalbumin following intracutaneous administration by Biocompatible Microneedle arrays,” AAPS Annual Meeting and Exposition, San Diego, CA, USA, pp. 113, Nov., 2007

80) Y. C. Kim, J. Y. Kim, Y. J. Park, and S. S. Lee, "Sound Source Localization using Piezoresistive Multi-Cantilever Microphones,” IEEE-Sensors’07, Altlanta, Georgia, USA, Oct., 2007

79) T. H. Yang, J. S. Lee, S. S. Lee, S. Y. Kim, and D. S. Kwon, “Conceptual Design of New Micro-Actuator for Tactile Display,” Int. Con. on Control, Automation, and System, Seoul, Korea, pp. 1306-1309, Oct., 2007

78) J. A. Lee, S. Hwang, K.-C. Lee, J. Kwak, S. I. Park, and S. S. Lee, “Pyrolyzed carbon biosensor for aptamer-protein interactions using electrochemical impedance spectroscopy,” 20th IEEE Int. Conf on Micro Electro Mechanical Systems (MEMS’07), Kobe, Japan, pp. 425-428, Jan., 2007

77) K. Lee, J. E. Yi, B. Kim, J. Ko, S. Jeong, M. Noh, and S. S. Lee, “Micro Generator Using Flywheel Energy Storage System with High Temperature Superconductor Bearing,” 20th IEEE Int. Conf. on Micro Electro Mechanical Systems (MEMS’07), Kobe, Japan, pp. 875-878, Jan., 2007

76) S. J. Youm, S. S. Lee, and S. Y. Lee, “Two-phase Flow Characteristics in a Co-flow Induced Microchannel with Microbubbles Generation,” Int. Conf. of Nanochannel, Microchannel, and Minichannel (ICNMM’07), Puebla, Mexico, June, 2007

75) S. M. Ryu, M. H. Han, D. Y. Yang, S. S. Lee, D.J. Kim, and L. S. Park, “Ultra-Slim Barrier Ribs for Plasma Display Panel by X-ray Lithography Process,” Int. Sym. Society for Information Display, Longbeach, USA, pp. 1205-1208, May, 2007 (Distinguished Student Paper Award)

74) S. M. Ryu, D. J. Kim, M. H. Han, Y. C. Kim, D. Y. Yang, L. S. Park, and S. S. Lee, “Ultra-Precision Fabrication of Barrier rib for Plasma Display Panel using X-ray Lithography process,” 18th Synchrotron Radiation User's Workshop & KOSUA Meeting, pp. 128, 2006

73) H. C. Shim, H. W. Lee, S. J. Yeom, Y. K. Kwak, S. S. Lee, and S. H. Kim, “Purification of Carbon Nanotube through Electric Field near the Microelectrode,” Int. Conf. of Nanoscience & Tech., Basel, Switzerland, No. 275, p 73, July, 2006

72) S. W. Lee and S. S. Lee, “Split and recombination micromixer including interfacial rotation,” APCOT, June 25-28, Singapore, 2006

71) J. A. Lee, K. C. Lee, S. I. Park, and S. S. Lee, “Real-time Detection of Protein Interactions Using Pyrolyzed Carbon,” 5th IEEE Conf. on Sensors, Nov., Korea.

70) K. Lee, B. S. Kim, J. S. Ko, S. K. Jeong, and S. S. Lee, “Advanced Design and Experiment of a Micro Flywheel Energy Storage System with a High Temperature Superconductor Bearing,” ASME IMECE, Chicago, Illinois, USA, IMCEC2006-15866, Nov., 2006

69) S. W. Lee and S. S. Lee, “PDMS Membrane Micro Actuator for Focal Tunable Microlens,” ASME IMECE, Chicago, Illinois, USA, IMCEC2006-14278, Nov., 2006

68) S. W. Lee and S. S. Lee, “Experimental Study of the Shrinkage Ratio of PDMS Its Alignment for the Wafer Level Process,” 10th Inte. Conf. on Miniaturized Systems for Chemistry and Life Sciences (micro-TAS’06), Tokyo, Japan, pp. 275-277, Nov., 2006

67) C. Y. Jin and S. S. Lee, “Fabrication of robust biocompatible in-plane microneedles with sharp 3-D tip,” 10th International Conference on Miniaturized Systems for Chemistry and Life Sciences (micro-TAS’06), Tokyo, Japan, pp. 678-680, Nov., 2006

66) Y. H. Choi, S. U. Son, and S. S. Lee, “Micro Cell Incubator Which Can Control the pH of Culture Media through On-Chip Integrated CO2 Generator,” 10th Int. Conf. on Miniaturized Systems for Chemistry and Life Sciences (micro-TAS’06), Tokyo, Japan, pp. 978-980, Nov., 2006

65) J. A. Lee, S. P. Hwang, K. C. Lee, J. H. K., S. I. Park, and S. S. Lee, “Pyrolyzed Carbon for Detection of Biomolecular Interactions using Electrochemical Impedance Spectroscopy,” 10th Int. Conf. on Miniaturized Systems for Chemistry and Life Sciences (micro-TAS’06), Tokyo, Japan, pp. 759-761, Nov., 2006

64) J. S. Lee, Y. C. Kim, W. S. Lee, and S. S. Lee, “Design and Fabrication of a Flexural Plate Wave Accelerometer,” ICEM, Jeju, Korea, pp. 241-244, Sept., 2006

63) J. A. Lee, J. Y. Yun, S. S. Lee, and K. C. Lee, “A Novel Microcantilever Device with Nano-interdigitated Electrodes (Nano-IDEs) for Biosensing Applications,”CEM, Jeju, Korea, pp. 1359-1362, Sept., 2006

62) B. Kim, J. Ko, S. Jeong, and S. S. Lee, “Design and Fabrication of a Micro Flywheel Energy Storage System with a High-Temperature Superconductor Bearing,”SME IMECE, Orlando, Florida, USA, IMECE2005-80862, Nov., 2005

61) S. W. Lee and S. S. Lee, “Mrofabricaton of the split and recombination micromixer and the effect of its cross-sectional rotation,”Int. Conf. Micro Minichannels, Toronto, Canada, 2005.

60) J. A. Lee, J. Y. Yun, K. C. Lee, S. I. Park, and S. S. Lee, “Fabrication of microcantilever with nano-interdigitated electrodes (IDEs) for DNA binding protein detection,” 9th Int. Conf. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’05), Boston, USA, pp. 217-219, Oct., 2005

59) S. U. Son, D. Kim, and S. S. Lee, “Investigation of microfluid focusing by phase transformation of liquid and analytical evaluation,” 9th Int. Conf. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’05), Boston, USA, pp. 1084-1086, Oct., 2005

58) S. U. Son, J. H. Seo, Y. H. Choi, S. S. Lee, and S. J. Kang, “Fabrication of a biochip for percent hemoglobin A1C(%HBA1C) level measurement,” 13th Int. Conf. on Solid-State Sensors and Actuators (Transducer’05), Seoul, Korea, pp. 1752-1755, June, 2005

57) J. H. Seo, D. J Kim, S. U. Son, E. S. Yoon, S. S. Lee, and S. J. Kang, “Separation of blood cells and plasma in microchannel,” 13th Int. Conf. on Solid-State Sensors and Actuators (Transducer’05), Seoul, Korea, pp. 1684-1687, June, 2005

56) S. W. Lee, D. S. Kim, S. S. Lee, and T. H. Kwon, “Split and recombination micromixer based on PDMS three-dimensional micro structure,” 13th Int. Conf. on Solid-State Sensors and Actuators (Transducer’05), Seoul, Korea, pp. 1533-1536, June, 2005

55) S. J. Moon, Y. H. Choi, and S. S. Lee, “A micromachined biopsy tool for a capsule type endoscope,” 13th Int. Conf. on Solid-State Sensors and Actuators (Transducer’05), Seoul, Korea, pp. 1371-1374, June, 2005

54) W. S. Lee, Y. C. Kim, J. S. Lee, S. W. Lee, and S. S. Lee, “Fabrication of circular diaphragm for piezoelectric acoustic devices,” 18th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’05), Miami, USA, pp. 307-310, Jan., 2005

53) Y. H. Choi and S. S. Lee, “Guided cell growth through surface treatments,” 2nd Int. Sym. on Nanomanufacturing (ISNM2004), Daejeon, Korea, pp. Nov., 2004

52) S. J. Moon and S. S. Lee, “A Novel Method for Microneedle Array Fabrication,” 2nd Int. Sym. on Nanomanufacturing (ISNM2004), Daejeon, Korea, pp. 497-499, Nov., 2004.

51) E. J. Lee, B. Su. Kim, J. S. Ko, Y. S. Chi, S. J. Kim, S. K. Jeong, and S. S. Lee, “An Integrated Micro HTS System for Energy Storage and Attitude Control for Three-Axis Stabilized Nanosatellites,” ASC 2004 Applied Superconductivity Conf., Jacksonville, FL, USA, Oct., 2004

50) S. J. Moon and S. S. Lee, “A Novel Fabrication Method for Microneedle Array,” 8th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’04), Malmo, Sweden, pp.360-362, Sept., Nov., 2004

49) S. U. Son, Y. H. Choi, and S. S. Lee, “A novel cell counter method using micro lattice array engraved on surface of cell culture dish,” Asia-Pacific Conf. of Transducers and Micro-Nano Tech., Sapporo, Japan, Vol. 3, pp. 1081-1086, July, 2004

48) S. Byun, J. M. Lim, S. J. Paik, Ahra Lee, K. I. Koo, S. Park, J. H. Park, B. D. Choi, E. S. Shim, D. Y. Jeon, S. S. Lee, and D. D. Cho, “Novel micro-spiked needles with buried micro-channels for micro-scale biopsy,” Asia-Pacific Conf. of Transducers and Micro-Nano Tech., Sapporo, Japan, vol. 3, pp. 1095-1099, July, 2004

47) Y. H. Choi and S. S. Lee, “Gel micropump with increased performance,” Asia-Pacific Conf. of Transducers and Micro-Nano Tech., Sapporo, Japan, vol. 3, pp. 1127-1130, July, 2004

46) Y. H. Choi and Seung S. Lee, “Oxygen micropump controlled by heating,” Asia-Pacific Conf. of Transducers and Micro-Nano Tech., Sapporo, Japan, vol. 3, pp. 1131-1134, July, 2004

45) S. J. Moon and S. S. Lee, “Fabrication of Microneedle Array using Inclined LIGA and Hot Embossing Process,” 11th Asia-Pacific Conf. on Non-Destructive Testing (APCNDT2003), Jeju, Korea, pp. 236, Nov., 2003.

44) Y. H. Choi, S. U. Son, and S. S. Lee, “Novel micropumps using gases as pumping source,” 11th Asia-Pacific Conf. on Non-Destructive Testing (APCNDT2003), Jeju, Korea, pp. 94, Nov., 2003

43) S. U. Son and S. S. Lee, “Narrowing Microfluidics Width in Microchannel using Air Boundaries,” 7th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’03), Squaw Valley, CA, USA, pp. 147-150, Oct., 2003

42) S. U. Son, Y. H. Choi, and S. S. Lee, “Fabrication of Micro Cell Counter Integrated with Oxygen Micropump,” 7th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’03), Squaw Valley, CA, USA, pp. 179-182, Oct., 2003

41) Y. H. Choi and S. S. Lee, “Novel Micropump Actuated by Drying of Gel,” 7th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’03), Squaw Valley, CA, USA, pp. 219-222, Oct., 2003

40) Y. H. Choi and S. S. Lee, “Novel micro Gas Generator of Carbon Dioxide for Actuation and Gas Source,” 7th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’03), Squaw Valley, CA, USA, pp. 611-614, Oct., 2003

39) K. C. Lee and S. S. Lee, “Deep X-ray Lithography using Mask with Integrated Electrostatic and Electrothermal Actuators,” 5th Int. Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST’03), Monterey, CA, USA, pp. 45-46, June, 2003

38) S. J. Moon and S. S. Lee, “Fabrication of microneedle array using inclined LIGA and hot embossing process,” 5th Int. Workshop on High-Aspect-Ratio Micro-Structure Technology (HARMST’03), Monterey, CA, USA, pp, 171-172, June, 2003

37) S. J. Moon and S. S. Lee, “Fabrication of microneedle array using inclined LIGA process”, 12th Int. Conf. on Solid-State Sensors and Actuators (Transducer’03), Boston, USA, pp. 1546-1549, June, 2003

36) S. H. Lee, K. C. Lee, and S. S. Lee, “Fabrication of an Electrothermally Actuated Electrostatic Microgripper,” 12th Int. Conf. on Solid-State Sensors and Actuators (Tranducer’03), Boston, USA, pp. 552-555, June, 2003

35) M. H. Han, H. C. Lim, Y. G. Jang, S. S. Lee, and S. J. Lee, “Fabrication of a Micro Riblet Film and Drag Reduction Effects on Curved Objects,” 12th Int. Conf. on Solid-State Sensors and Actuators (Transducer’03), Boston, USA, pp. 396-399, June, 2003

34) S. H. Lee, S. S. Lee, J. U. Jeon, and K. C. No, “Fabrication of a ZnO Piezoelectric Cantilever with a High Aspect-Ratio Nano Tip,” 16th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’03), Kyoto, Japan, pp. 72-75, Jan., 2003

33) Y. H. Choi, S. U. Son, and S. S. Lee, “Novel Micropump using Oxygen as Pumping Source,” 16th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’03), Kyoto, Japan, pp. 116-119, Jan., 2003

32) S. U. Son, Y. H. Choi, and S. S. Lee, “Fabrication of Micro Cell Counter with Boron Diffused Resistor,” 16th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’03), Kyoto, Japan, pp 311-314, Jan., 2003

31) D. S. Kim, S. W. Lee, T. H. Kwon, and S. S. Lee, “Barrier Embedded Chaotic Micromixer,” 16th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’03), Kyoto, Japan, pp. 339-342, Jan., 2003

30) M. H. Han and S. S. Lee, “Fabrication of 3D Microstructures with Inclined/Rotated UV Lithography,” 16th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’03), Kyoto, Japan, Jan., pp. 554-557, 2003

29) K. C. Lee and S. S. Lee, “3D Fabrication using Deep X-ray Mask with Integrated Micro Actuator,” 16th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’03), Kyoto, Japan, Jan., pp. 558-561, 2003

28) S. K. Lee, H. S. Lee, S. S. Lee, and T. H. Kwon, “icrolense Fabrication by the Modified LIGA Process and Hot Embossing Process,”ASME IMECE, New Orleans, USA, Nov., 2002

27) K. C. Lee and S. S. Lee, “eep X-ray mask with Integrated Actuator for 3D LIGA Process,”ASME IMECE, New Orleans, USA, Nov. 2002

26) S. J. Moon, J. Y. Yoon, S. S. Lee, H. G. Nam, and Y. T. Chi, “Micromachined DNA Manipulation Device using Circular Multi-electrodes,”ASME IMECE, New Orleans, USA, Nov., 2002

25) D. S. Kim, S. W. Lee, T. H. Kwon, and S. S. Lee, “Barrier Embedded Choatic Micromixer,” 6th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’02), Nara, Japan, pp. 757-759, Nov., 2002

24) J. Y. Yun, S. J. Moon, S. S. Lee, H. G. Nam, and Y. T. Chi, “Micromachined Device for Manipulation of Charged Biomolecule,” 6th Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’02), Nara, Japan, pp. 248-250, Nov., 2002

23) M. H. Han, W. S. Lee, S. K. Lee, and S. S. Lee, “Microfabrication of 3D Oblique Structures by Inclined UV Lithography,” 6th Int. Int. Sym. on Miniaturized Systems for Chemistry and Life Science (micro-TAS’02), Nara, Japan, pp. 106-108, Nov., 2002

22) H. S. Lee, S. K. Lee, T. H. Kwon, and S. S. Lee, “Birefringence Distribution in V-grooved Optical Parts by Hot Embossing Process,” IEEE/LEOS Int. Conf. on Optical MEMS, Lugano, Switzerland, pp. 135-136, August, 2002

21) S. K. Lee, D. S. Kim, S. S. Yang, S. S. Lee, and T. H. Kwon, “Microlens Fabrication by the Modified LIGA Process and Its Modeling and Analysis,” IEEE/LEOS Int. Conf. on Optical MEMS, Lugano, Switzerland, pp. 77-78, August, 2002

20) H. S. Lee, S. K. Lee, T. H. Kwon, and S. S. Lee, “Microlens Array Fabrication by Hot Embossing Process,” IEEE/LEOS Int. Conf. on Optical MEMS, Lugano, Switzerland, pp. 73-74, August, 2002

19) K. C. Lee and S. S. Lee, “Deep X-ray Mask with Integrated Actuator for 3D Microfabrication,” Pacific Rim Workshop on Transducers and Micro/Nano Technologies Xieman, China, 71-74, July, 2002

18) M. H. Han, J. K. Juh, S. S. Lee, and S. J. Lee, “Micro-Riblet Film for Drag Reduction,” Pacific Rim Workshop on Transducers and Micro/Nano Technologies, Xieman, China, pp. 47-50, July, 2002

17) S. J. Lee and S. S. Lee, “Drag Reduction of Bluff Bodies with a Flexible Micro-riblet,” The World Con. of Korean & Korean-Ethnic Scientists and Engineers, Seoul, Korea, We-B1-4, July, 2002

16) D. S. Kim, K. C. Lee, T. H. Kwon, and S. S. Lee, “Transient Filling Flow into Microchannels Considering Surface Tension,”5th Int. Conf. Modeling and Simulation of Microsystems, San Juan, Puerto Rico, USA, pp. 108-111, April, 2002

15) D. S. Kim, S. K. Lee, S. S. Yang, T. H. Kwon, and S. S. Lee, “Prediction Model of Microlens Fabricated by Modified LIGA Process,” 5th Int. conf. Modeling and Simulation of Microsystems, San Juan, Puerto Rico, USA, pp. 254-257, April, 2002

14) S. K. Lee, K. C. Lee, and S. S. Lee, “Microlens Fabrication by the Modified LIGA Process,” 15th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’02), Las Vegas, CA, USA, pp. 520-523, Jan., 2002

13) S. C. Ko, Y. C. Kim, S. S. Lee, S. H. Choi, and S. R. Kim, “Membrane Type Piezoelectric Acoustic Devices,” 15th IEEE Int. Conf. Micro Electro Mechanical System (MEMS’02), Las Vegas, CA, USA, pp. 296-299, Jan., 2002

12) K. C. Lee and S. S. Lee, ‘Integrated Deep X-ray Mask with Electrostatic Actuator for Modified LIGA Process,” Int. Sensor Conf., Seoul, Korea, pp. 85-86, Oct., 2001.

11) S. C. Ko, S. S. Lee, S. H. Choi, and S. R. Kim, “Piezoelectric Membrane Microspeaker,” Int. Sensor Conf., Seoul, Korea, pp. 93-94, Oct., 2001.

10) S. K. Lee, K. C. Lee, and S. S. Lee, “Micro-lens fabricated using the glass transient temperature modification by the LIGA Process,” MOEMS and Miniaturized Systems-II, Vol. 4561, pp. 123-130, 2001

9) S. J. Lee, J. K. Huh, and S. S. Lee, “PIV Measurements of flow around NACA 0012 Airfoil with a flexible Micro-riblet surface,” 4th Int. sym. on Particle Image Velocimetry, Gottingen, Germany, pp. 1-8, Sep., 2001

8) K. C. Lee, S. G. Lee, S. J. Moon, and S. S. Lee, “Deep X-ray Mask Embedded in Electrostatic Actuator for 3-D LIGA Process,” 32nd Int. Sym. on Robotics, Seoul, Korea, pp. 1969-1972, April, 2001

7) J. C. Jeon, S. W. Oh, S. S. Lee, and M. H. Kim, “Design and Fabrication of Micro Heat Flux Sensor,” Int. Conf. on Intelligent Robots and Systems, Kyungju, Korea, pp. 1045-1048, Oct., 1999

6) J. C. Jeon, S. W. Oh, S. S. Lee, and M. H. Kim, “Design and Fabrication of a Micro Heat Flux Sensor,” Int. Conf. Solid-State Sensors and Actuators (Transducer'99), IEEE, Sendai, Japan, pp. 414-417, June, 1999

5) J. S. Jang and S. S. Lee, “MHD Micropump using Lorentz Forces,” ASME IMECE, Anaheim, CA, USA, pp. 439-444, Nov., 1998

4) D. An, Y. S. Oh, B. L. Lee, K. Y. Park, Y. I. Go, J. G. Kim, C. M. Song, and S. S. Lee, “Forced-Balanced Dual-Axis Microgyroscope,” Int. SPIE Conf., Adelaide, Australia, pp. 337-346, Dec., 1997

3) S. S. Lee and R. M. White, “Piezoelectric Cantilever Microphone, Microspeaker, and Voltage-to-Frequency Converter,” ASME IMECE, San Francisco, CA, USA, pp. 231-235, Nov., 1995

2) S. S. Lee and R. M. White, “Self-Excited Piezoelectric Cantilever Oscillators,” Int. Conf. Solid-State Sensors and Actuators (Transducer'95), Stockholm, Sweden, pp. 417-420, June, 1995

1) S. S. Lee, R. P. Ried, and R. M. White, “Piezoelectric Cantilever Microphone and Microspeaker,” IEEE Solid-State Sensors and Actuators Conf., Hilton Head Island, SC, USA, pp. 33-37, June, 1994

Domestic conference

92) 정지훈, 최형수, 이승섭, "정전분무 고폭비 마이크로 노즐을 이용한 미생물 살균 기능의 물 미세 액적 생성," 2019 KMEMS, 제주, 4월 2019

91) 최형수, 정지훈, 이승섭, "물의 정전분무를 위한 MEMS 기반 초소형 노즐의 설계 및 해석," 2018 한국정밀공학회 춘계학술대회, 제주, 5월 2018

90) 진준태, 엄준성, 이승섭, "development of pyramidal micro-mirror integrated with anti-helmholtz coil for MOT devices," 2016 한국광학회 동계학술대회, 대전, 1월 2016

89) 정지훈, 엄준성, 이승섭, 최성수, 서경웅, 임동완, 오종수, "스테인리스 강 습식식각공정 기반 소형 기계식 안전장전장치 설계 및 제작", 2015 한국정밀공학회 추계학술대회, 정선, 12월 2015

88) 엄준성, 정지훈, 이승섭, 서성호, 정홍집, 곽상은, "L자형 비틀림 구조 기반 광범위 가속도 측정용 압저항 센서에 대한 해석", 2015 한국군사과학기술학회 추계학술대회 신관기술 컨퍼런스, 대전, pp 1133-1134, 11월 2015

87) 임미경, 진석민, 이승섭, 이봉재, "도핑된 실리콘-그래핀-InSb 근접장 열광전지 시스템", 2014 대한기계학회 추계학술대회, 광주, KSME WE15C003, 11월 2014

86) 정지훈, 엄준성, 오종수, 최성수, 서경웅, 임동완, "습식식각공정을 이용한 안전장전장치 안전요소의 설계 및 제작", 2014 고에너지 물질 국방소재 학술대회, 대전, 11월, 2014

85) 이춘재, 엄준성, 정지훈, 이승섭, 오종수, 양해성, 임동완, 서경웅, "MEMS 스프링을 활용한 포탄용 안전장전장치 설계", 2014 한국군사기술학회, 제주, 6월, 2014

84) 임미경, 이승섭, 이봉재, "근접장 복사열전달에서 그래핀의 효과에 관한 고찰", 2013 대한기계학회 열공학부문 춘계학술대회 논문집, 부산, pp 217-218, 5월 2013

83) 김선락, 이재학, 유중돈, 송준엽, 이승섭, "3D 적층칩을 위한 Edge traces 공정에 관한 연구", 2011 한국정밀공학회 추계학술대회, 경주, p433-444, 10월, 2011

82) 석진오, 이용수, 김진하, 조익천, 이승섭, 강인식, 오종수, 류성문, "MEMS 기반의 포탄둉 안전장전장치 개발”, 2011 한국군사기술학회, 제주, 6월, 2011

81) 조익천, 임재희, 양동준, 김진하, 석진오, 이승섭, "볼베어링을 이용한 지능화탄에 대한 MEMS 관성 스위치”, 2011 한국군사기술학회, 제주, 6월, 2011

80) 석진오, 이용수, 김진하, 강인식, 오종수, 류성문, 이승섭, "Development of MEMS based Safety & Arming Device(SAD) ", 2011 KMEMS, 제13회 한국 MEMS 학술대회논문집, 제주, p299-300, 4월, 2011

79)임미경, 박현향, 이승섭, "Synthesis and analysis of nanoporous material using microchannel " 2011 KMEMS, 제13회 한국 MEMS 학술대회논문집, 제주, p 243-244, 4월, 2011

78) 이용수, 김진하, 류성문, 강인식, 오종수, 이승섭, 김영원, "Development of MEMS Based Safety & Arming Device”, 2010 신관컨퍼런스, 11월, 2010

77) 김진하, 이승훈, 이승섭, 이정아, 심승보, 이광철, "Development of MEMS Based Safety & Arming Device”, 2010 KMEMS, 제12회 한국 MEMS 학술대회논문집, 제주, 4월, 2010

76) 이용수, 이석우, 이승섭, "열분해된 고종회비 탄소 나노와이어의 다각적 연구”, 2010 KMEMS, 제12회 한국 MEMS 학술대회논문집, 제주, 4월, 2010

75) 김진하, 이승훈, 이정아, 심승보, 이광철, 이승섭 "비틀림 셀프 펌핑 스프링이 내재된 π-형상 파라메트릭 공진기 개발,” 대한기계학회 추계학술대회 논문집, 용평, pp. 3139-3144, 11월, 2009

74) 이정아, 이석우, 이광철, 박세일, 이승섭 "생체 응용을 위한 고종횡비 탄소 마이크로 니들의 제작,” 제 11회 한국 MEMS 학술대회 논문집, 제주, pp. 89-90, 4월, 2009

73) 이창화, 이석우, 이승섭 "수직 정렬된 ITO 팁 어레이 제작 및 전계방출,” 제 11회 한국 MEMS 학술대회 논문집, 제주, pp. 59-60, 4월, 2009

72) 김춘연, 이승섭 "넓은 범위의 경사각 측정이 가능한 휘기 쉬운 폴리머 기반 소형 경사각 센서,” 제11회 한국 MEMS 학술대회 논문집, 제주, pp. 147-148, 4월, 2009

71) 이석우, 이승섭 "Huygens-Fresnel 회절원리를 이용한 고종횡비 SU-8 팁 어레이의 형상예측,” 제11회 한국 MEMS 학술대회 논문집, 제주, pp. 325-326, 4월, 2009

70) 박현향, 이대훈, 송영훈, 이승섭 "미세채널 반응기 내 상압 글로우 플라즈마를 이용한 암세포의 아폽토시스 유도,” 제11회 한국 MEMS 학술대회 논문집, 제주, pp. 219-220, 4월, 2009

69) 이강원, 이정아, 이광철, 이승섭, "내장된 투명 전극을 위한 탄소나노튜브 필름의 전사 방법”, 제 11회 한국 MEMS 학술대회 논문집, 제주, pp. 57-58, 4월, 2009

68) 이승훈, 이석우, 권혁준, 이광철, 이승섭, "온도 변화를 이용한 고분자 막 마이크로 액추에이터의 공진 주파수 튜님,” 대한기계학회 추계학술대회 논문집, 용평, pp. 1857-1862, 4월, 2008

67) 권혁준, 이석우, 이승섭, "PDMS 막과 열유압 구동기를 가진 단일점 출력 모듈을 배열한 점자 출력 장치,” 제 10회 한국 MEMS 학술대회 논문집, 제주, pp. 383-384, 4월, 2008

66) 염수진, 안상모, 이승섭, 이상용, "수조 비등에서 표면 특성이 CHF에 미치는 영향에 대한 연구 동향 고찰,” 대한기계학회 추계학술대회 논문집, 용평, pp. 2578-2582, 11월, 2008

65) 한만희, 박현향, 현동훈, 이승섭, 김창현, 김창규, "기판에 구멍이 있는 생체적합성 고분자 미세바늘 시트의 제작 및 약물전달 효과,” 제10회 한국 MEMS 학술대회 논문집, 제주, pp. 155-156, 4월, 2008

64) 이정아, 이석우, 이광철, 박세일, 이승섭, "double exposure와 pyrolysis를 이용한 3차원 미세구조물의 제작,” 제10회 한국 MEMS 학술대회 논문집, 제주, 2007년 4월, pp. 5-6

63) 이석우, 이승섭, "전자기력 구동기가 삽입된 가변초점 유체렌즈,” 제 10회 한국 MEMS 학술대회 논문집, 제주, pp. 273-274, 4월, 2008

62) 김용철, 김진영, 박영진, 이승섭, "압저항 다 채널 캔틸레버를 이용한 음원 위치 추정에 관한 연구,” 제10회 한국 MEMS 학술대회 논문집, 제주, pp. 223-224, 4월, 2008

61) 이운섭, 이승섭, "집중 질량의 증가에 따른 원형 진동판의 고유 징동수 감소와 그에 따른 마이크로폰의 감도 증가에 관한 연구,” 제10회 한국 MEMS 학술대회 논문집, 제주, pp. 225-226, 4월, 2008

60) 이진승, 이승섭, "고종횡비 SU-8 몰드를 이용한 전기 도금 등방성 서스펜션 개발과 전자기력 구동,” 제10회 한국 MEMS 학술대회 논문집, 제주, pp. 213-214, 4월, 2008

59) 김동주, 류승민, 한만희, 김덕곤, 우창민, 박이순, 양동열, 이승섭, "싱크론트론 방사광을 이용한 초고정세 격벽 형성,” 2007 춘계공업화학학회, pp.XX-XX, 2007

58) 류승민, 김동주, 한만희, 양동열, 이승섭, 박이순, "X-선 리소그래피공정의 무기물 입도에 따른 격벽 형상정밀도 특성,” 한국정밀공학회 춘계학술대회, pp. 183-184, 6월, 2007

57) 이정아, 황성필, 곽주현, 박세일, 이광철, 이승섭, "엡타머가 고정화된 열분해 탄소전극을 이용한 단백질의 전기화학적인 임피던스 측정,” 제9 회 한국 MEMS 학술대회 논문집, 제주, pp. 93-96, 4월, 2007

56) 김춘연, 김용철, 이승섭, "SU-8 기반 LIGA 공정을 이용한 미세바늘 어레이의 제작,” 제9 회 한국 MEMS 학술대회 논문집, 제주, pp. 673-676, 4월, 2007

55) 한만희, 현동훈, 박현향, 이승섭, 김창현, 김창규, "In-plane 미세바늘을 이용한 생체적합성 고분자 out-of-plane 미세바늘 시트 제작방법 연구,” 제9회 한국 MEMS 학술대회 논문집, 제주, pp. 590-593, 4월, 2007

54) 심형철, 이형우, 염수진, 곽윤근, 이승섭, 김수현, "미세전극 주변의 전기장을 이용한 탄소나노튜브 정제에 관한 연구,” 대한기계학회 추계학술대회, 무주, pp. 316-321, 11월, 2006

53) 김춘연, 이승섭, "자외선 경사노광 공정을 이용한 생분해성 미세바늘 어레이 제작,” 제8회 한국 MEMS 학술대회, 제주, 4월, 2006

52) 염수진, 이상용, 이승섭, " 마이크로 기포를 이용한 이상 혼합기의 제작과 실험,” 제8회 한국 MEMS 학술대회, 제주, 4월, 2006

51) 이석우, 이승섭, " 계면의 회전효과를 포함하는 분리, 재결합 원리를 이용한 미세 혼합기,” 제8회 한국 MEMS 학술대회, 제주, 4월, 2006

50) 이운섭, 오현석, 이승섭, 유중돈, "단결정 실리콘 웨이퍼 내에서 Au-Si와 Al-Si eutectic alloys의 방향성 성장에 관한 연구,” 제8회 한국 MEMS 학술대회, 제주, 4월, 2006

49) 이강원, 김봉수, 고준석, 이승섭, 정상권, "초전도 베어링을 이용한 초소형 플라이휠 에너지 저장 장치의 성능개선,” 제8회 한국 MEMS 학술대회, 제주, 4월, 2006

48) 이정아, 윤재영, 이승섭, 이광철, 박세일, "Nano-IDEs를 가지는 마이크로 캔틸레버의 제작 및 cyclic voltammetry를 이용한 DNA의 선택적 고정화”, 제8회 한국 MEMS 학술대회, 제주, pp. 96-99, 4월, 2006

47) 이석우, 김동성, 권태헌, 이승섭, "PDMS 3차원 구조를 기반으로 하는 Split and Recombination 마이크로 믹서,” 2005년도 제7회 한국 MEMS 학술대회, 제주, pp. 44-47, 4월, 2005

46) 이석우, 이승섭, "웨이퍼 단위 공정에의 적용을 위한 PDMS 수축률의 실험적 연구,” 2005년도 제7회 한국 MEMS 학술대회, 제주, pp. 437-440, 4월, 2005

45) 이운섭, 김용철, 이진승, 이석우, 이승섭, "압전형 음향 디바이스를 위한 원형 진동판에 대한 연구,” 2005년도 제7회 한국 MEMS 학술대회, 제주, pp. 220-224, 4월, 2005

44) 김봉수, 고준석, 이은정, 이승섭, 정상권, "고온 초전도체 비접촉 베어링을 이용한 초소형 플라이휠 에너지 저장 장치의 설계와 제작,” 제7회 한국 MEMS 학술대회, 제주, pp. 19-22, 4월, 2005

43) 김봉수, 고준석, 이은정, 정상권, 이승섭, "고온 초전도체 비접촉 베어링을 이용한 초소형 플라이휠 에너지 저장 장치의 설계와 제작”, 제7회 한국 MEMS 학술대회, 제주도, pp. 19-22, 4월, 2005

42) 김용철, 이운섭, 이진승, 이승섭, "ZnO을 이용한 원형 마이크로폰,” 대한기계학회 춘계학술대회, BEXCO,5/25-27, 2005

41) 최요한, 손상욱, 이승섭, "일체화된 이산화탄소 발생기로써 배양액의 pH가 조절되는 초소형 세포 배양기 제작,” 제6회 한국 MEMS 학술대회, 제주도, pp. 281-284, 4월, 2004

40) 최요한, 이승섭, "표면 처리에 의한 세포 증식 패턴의 조절”, 제6회 한국 MEMS 학술대회, 제주도, pp. 367-371, 4월, 2004

39) 최요한, 이승섭, "젤의 건조로 구동되는 새로운 형태의 미세 펌프”, 제6회 한국 MEMS 학술대회, 제주도, pp. 428-432, 4월, 2004

38) 최요한, 이승섭, "구동력과 가스 제공을 위한 이산화탄소 발생기”, 제6회 한국 MEMS 학술대회, 제주도, pp. 433-437, 4월, 2004

37) 손상욱, 최요한, 이승섭, "산소 미세 펌프가 내장된 미세 세포 계수기의 제작", 대한기계학회 생산 및 설계공학 부문 추계학술대회논문집, 충북대학교, pp. 124-127, 11월, 2003

36) 손상욱, 이승섭, "미세 채널에서 가스 경계면을 이용한 미세 유체의 폭 좁히기", 대한기계학회 생산 및 설계공학 부문 추계학술대회논문집, 충북대학교, pp.53-56, 11월, 2003

35) 최요한, 이승섭, "구동력과 가스 제공을 위한 이산화탄소 발생기", 대한기계학회 생산 및 설계공학 부문 추계학술대회 논문집, 청주, pp. 5-8, 11월, 2003

34) 최요한, 이승섭, "젤의 건조에 의하여 구동되는 새로운 형태의 미세 펌프", 대한기계학회 생산 및 설계공학 부문 추계학술대회 논문집, 청주, pp. 1-4, 11월, 2003

33) 이정아, 이현섭, 이성근, 이승섭, 권태헌, "변형 Deep X-ray 공정과 Hot Embossing 공정을 이용한 마이크로 렌즈 및 어레이 제작,” 한국정밀공학회 춘계학술대회, pp. 300-304, 2003

32) 손상욱, 최요한, 이승섭, "산소펌프를 내장한 마이크로 세포 계수기의 제작,” 제5회 한국 MEMS 학술대회, 제주도, pp. 436-440, 5월, 2003

31) 이석우, 이승섭, "기판 반전 공정을 이용한 광섬유 정렬용 SU-8 캔틸레버의 제작,” 제5회 한국 MEMS 학술대회, 제주도, pp. 384-388, 5월, 2003

30) 김동성, 강태곤, 이석우, 권태헌, 이승섭, "실험 및 수치 해석을 통한 배리어를 포함한 마이크로 믹서(BEM)의 특성 연구,” 제5회 한국 MEMS 학술대회, 제주도, pp. 355-360, 5월, 2003

29) 문상준, 이승섭, "경사 LIGA 공정을 이용한 미세 바늘 어레이의 제작,” 제5회 한국 MEMS 학술대회, 제주도, pp. 338-343, 5월, 2003

28) 이상훈, 이승섭, 전종업, 노광춘, "고종횡비 나노팁을 가진 ZnO 압전 캔티레버의 제작에 대한 연구”, 제5회 한국 MEMS 학술대회, 제주도, pp. 290-295, 5월, 2003

27) 최요한, 손상욱, 이승섭, "산소를 동력원으로 하는 새로운 형태의 초소형 펌프,” 제5회 한국 MEMS 학술대회, 제주도, pp. 261-265, 5월, 2003

26) 김동성, 이석우, 권태헌, 이승섭, "배리어가 포함된 카오스 마이크로 믹서의 개발,” 대한기계학회 추계학술대회, KOEX, 서울, 11월, 2002

25) 임희창, 한만희,이상준,이승섭 , "마이크로 리블렛을 이용한 원주 주위 유동의 제어에 관한 연구", 대한기계학회 추계학술대회, 서울, pp.2217-2222, 11월, 2002

24) S. J. Lee and S. S. Lee, "Drag Reduction of Bluff Bodies with a Flexible Micro-Riblet," 2002 세계한민족 과학기술자 종합학술대회, pp. 34-38, 7월, 2002

23) 김동성, 이성근, 양상식, 권태헌, 이승섭, "변형 LIGA 공정을 통해 구현된 microlense의 모델링 및 시뮬레이션,” 대한기계학회 춘계학술대회, 용평, pp. 1096-1101, 5월, 2002

22) 김동성, 이광철, 권태헌, 이승섭, "마이크로 채널 내부로의 충전유동에 대한 모데링 및 시뮬레이션,” 대한기계학회 춘계학술대회, 용평, pp. 1102-1107, 5월, 2002

21) 이상준, 허정기, 김국배, 이승섭, "Micro-PIV를 이용한 마이크로 채널 내부 유동의 속도장 측정,” 대한기계학회 춘계학술대회, 용평, 5월, 2002

20) 이성근, 이광철, 이승섭, "Deep X-ray를 이용한 마이크로 렌즈의 제작,”제4회 Korea MEMS 학술대회, 경주, pp. 89-94, 4월, 2002

19) 한만희, 허정기, 이승섭, 이상준, "MEMS 기술을 이용한 미소 리블렛 제작 및 항력 감소 실험,”제4회 한국 MEMS 학술대회, 경주, pp. 1-6, 4월, 2002

18) 이광철, 이승섭 "마이크로 액튜에이터를 내장한 X-선 마스크,”제4회 한국 MEMS 학술대회, 경주, 2002, 99-104, 4월, 2002

17) 고상춘, 김용철, 이승섭 "멤브레인 타입의 압전형 음향 디바이스,”제4회 한국 MEMS 학술대회, 경주, 95-98, 4월, 2002

16) 문상준, 윤재영, 이승섭, 남홍길, 지연태, "원형 다중 전극을 이용한 DNA 조작 소자,”제4회 한국 MEMS 학술대회, 경주, pp. 131-135, 4월, 2002

15) 허정기, 이승섭, 이상준, "마이크로 리브렛이 부착된 NACA0012 익형 후류의 PIV 속도장 측정 연구,” 대한기계학회 열유체 학술강연회, 전주, pp. 405-409, 9월, 2001

14) 김동성, 이광철, 권태헌, 이승섭, "표면장력 효과를 고려한 마이크로 채널 충전 과정 연구”, 대한기계학회 춘계학술대회, 제주, pp. 47-52, 6월, 2001

13) 이광철, 이성근, 문상준, 이승섭, "Deep X-ray Mask Embedded in Electrostatic Actuator for 3-D LIGAProcess," 1st Intelligent Microsystem, 서울, pp. 180-183, 4월, 2001

12) 오석환, 전재철, 이승섭, 김무환 ; "구리도금층을 이용한 미세 열유속 센서”, 제2회 한국MEMS 학술대회, 대한기계학회, 대전, pp. 77-82, 4월, 2000

11) 오동영, 이승섭, 정동관, 박노열 ; "LIGA 공정을 이용한 삼면반사체 제작”, 제2회 한국 MEMS 학술대회, 대한기계학회, 대전, pp. 185-190, 4월, 2000

10) 오종현, 오동영, 이승섭 ; "수은방울 경사각 센서의 개발”, 제2회 한국MEMS 학술대회, 대한기계학회, 대전, pp. 133-138, 4월, 2000

9) 김지우, 이승섭, 권오대 ; "광학응용을 위한 초소형 SDA (Scratch Drive Actuator) 액튜에이터 설계 및 제작”, 대한전자공학회 추계학술대회, 대한전자공학회, 수원, pp. 905-908, 1999

8) 오종현, 오동영, 이승섭 ; "수은을 이용한 각도센서", 한국정밀공학회, 서울, pp. 1327-1330, 1999

7) 전재철, 이승섭, 김무환, "미세 열유속 센서,” 원자력학회 춘계학술대회, 원자력학회, 포항, 5월, pp. , 1999

6) 오동영, 길계환, 이승섭, 정동관, "LIGA 공정을 이용한 삼면반사체의 제작,” 한국정밀공학회 춘계학술대회, 한국정밀공학회, 대구, pp. 805-809, 5월, 1999

5) 전재철, 오석환, 이승섭, 김무환, "미세 열유속 센서의 설계 및 제작,” 제 1회 MEMS 학술대회, 대한전기학회, 서울, pp. 9-13, 4월, 1999

4) 길계환, 이승섭, 염영일, "LIGA공정에서의 노광시간과 X선 마스크 흡광체의 두께," 한국정밀공학회 추계학술대회, 한국정밀공학회, pp. 83-88, 11월, 1998

3) 장재성, 이승섭, "Fabrication and Experimental Study of MHD Micropump Using Lorentz Force,” MEMS 연구회 학술대회, 대한전기학회, 대전, pp. 61-68, 4월, 1998

2) 이승섭, R.M. White, "압전 미세 캔틸레버 음향소자를 이용한 전압-주파수 변환기,” 대한 전기학회 MEMS연구회 학술대회, 대한전기학회, 서울, pp. 69-81, 4월, 1997

1) 이승섭, "미세압전 캔틸레버를 이용한 마이크로 폰 및 마이크로 스피커,” 한국정밀 공학회 추계학술대회, 한국정밀공학회, 전주, pp. 347-351, 5월, 1997